It is currently Sat Dec 16, 2017 7:32 pm

Resistor

 
Posts: 5844
Joined: Sat Jul 23, 2011 8:19 pm

Resistor

Post by crustytv » Tue Apr 12, 2016 1:25 pm

4K7 resistor network, any TV techs remember seeing them in sets and if so which? I would imagine mid to late 70's use. Also would they be 1W or 3W

4k7.jpg

 
Posts: 87
Joined: Wed Aug 03, 2011 8:29 am
Location: Manchester

Re: Resistor

Post by Mikey66 » Tue Apr 12, 2016 1:28 pm

Thorn used these in their 9K & 9K6 series sets. I can't remember the particular values though.

 
Posts: 5844
Joined: Sat Jul 23, 2011 8:19 pm

Re: Resistor

Post by crustytv » Tue Apr 12, 2016 1:42 pm

Hi Mike,

Now you mention it I seem to recall something similar on my Thorn 9905 chassis.

 
Posts: 2853
Joined: Wed Jul 27, 2011 7:13 pm
Location: Croydon

Re: Resistor

Post by sideband » Tue Apr 12, 2016 1:43 pm

They've shown up in various sets over the years. The early type were actually individual resistors potted in clay. These are thick-film units and probably 70's/80's

8137 could be a date code...37 week of 1981

 
Posts: 124
Joined: Tue Jul 26, 2011 12:00 pm
Location: Virginia Water, Surrey

Re: Resistor

Post by Pamphonica » Tue Apr 12, 2016 5:55 pm

We used to use lots of these as termination resistors on parallel data links (like SCSI etc) in the late 70s.
From memory the individual resistor power rating was only 0.25W

Jeremy

 
Posts: 329
Joined: Tue May 01, 2012 11:23 am

Re: Resistor

Post by turretslug » Tue Apr 12, 2016 6:05 pm

Not necessarily 4k7, but arrays featured a lot with things like 7 segment displays, keeping PCBs neat, compact and quick to load.

 
Posts: 3712
Joined: Sun Feb 12, 2012 7:43 pm
Location: North Hykeham, Lincolnshire and Ilford, Essex (but not for much longer ...!)

Re: Resistor

Post by Terrykc » Wed Apr 13, 2016 11:26 am

Yes, 9 pins, one common and 8 resistors. Ideal pull-up resistors for 8-bit devices!


Return to Components & Products



Who is online

Users browsing this forum: No registered users and 1 guest