It is currently Wed Jul 26, 2017 9:40 pm

Does Anyone Recognise This Connector Cable?

Valves, Transistors, IC's and Components. Bench test techniques, Test Gear - Valve Testers, Scopes, CRT Testers, Bridges, Sig Gens, Pattern Gens, Workshop tours etc
 
Posts: 692
Joined: Sun Aug 07, 2011 8:48 am
Location: Edinburgh

Does Anyone Recognise This Connector Cable?

Post by peter scott » Sat Feb 13, 2016 6:59 pm

Does Anyone Recognise This Connector Cable?

IMAG0644 (Small).jpg
IMAG0644 (Small).jpg (25.03 KiB) Viewed 925 times


Thanks,

Peter

 
Posts: 1478
Joined: Fri Feb 03, 2012 9:56 am
Location: Gorleston-On-Sea, Norfolk

Re: Does Anyone Recognise This Connector Cable?

Post by Jamie » Sat Feb 13, 2016 7:36 pm

There were lots of connectors in the 50s and 40s similar to this, all using randomly positioned pins. Different manufacturers used different plugs for their sets. All I can say about it sorry if that's no use. Could be military related though looking at the cloth cable and general bulkiness of the connector body itself?

 
Posts: 692
Joined: Sun Aug 07, 2011 8:48 am
Location: Edinburgh

Re: Does Anyone Recognise This Connector Cable?

Post by peter scott » Sun Feb 14, 2016 10:39 am

Thanks for replying Jamie. I suspect it belongs to the 30s/40s era and domestic rather than military. Probably connecting HT and LT between separate chassis.

Peter

 
Posts: 1931
Joined: Mon Jul 25, 2011 12:12 pm
Location: Burghfield, Reading, UK

Re: Does Anyone Recognise This Connector Cable?

Post by Brianc » Sun Feb 14, 2016 10:57 am

Hi Peter.
I think you're right about domestic - have a look at the Baird T18 data. baird use what seems to be an identical connector in their pre-war range of teles!

 
Posts: 2714
Joined: Sun Sep 01, 2013 6:19 pm
Location: Behind the sofa

Re: Does Anyone Recognise This Connector Cable?

Post by Cathovisor » Sun Feb 14, 2016 11:44 am

That would make it a Carr connector if it is.

 
Posts: 692
Joined: Sun Aug 07, 2011 8:48 am
Location: Edinburgh

Re: Does Anyone Recognise This Connector Cable?

Post by peter scott » Sun Feb 14, 2016 12:54 pm

Thanks Cath and Brian, I have some schematics for the T18 that show a rectangular 6 pin connector used in various places. I haven't found any photos as such. My one has a seventh pin the same form as the other six but I suspect it's just there for registration as it doesn't appear connected and I'm unable to open up the plugs. I tried web searching for Carr but the nearest I got was Carr-Lane although nothing similar.

Looking closer at the Baird connector the 6 pin grouping is similar but it appears to use a group of 4 smaller diameter pins in a square along with 2 larger diameter pins. The right era and very similar but not the same. Good suggestion though.

Thanks

Peter

 
Posts: 1931
Joined: Mon Jul 25, 2011 12:12 pm
Location: Burghfield, Reading, UK

Re: Does Anyone Recognise This Connector Cable?

Post by Brianc » Sun Feb 14, 2016 1:41 pm

Here are a couple of T18 pictures thanks to Trevor, Peter. If you ask me, they're the same connectors as you have. The 7th pin, I assume, is for orientation purposes. Waddya think?
Baird T18  2014 009.jpg
Baird T18  2014 015.jpg

 
Posts: 692
Joined: Sun Aug 07, 2011 8:48 am
Location: Edinburgh

Re: Does Anyone Recognise This Connector Cable?

Post by peter scott » Sun Feb 14, 2016 2:08 pm

Hi Brian,

Looks spot-on!

I'm guessing this is TNC Trevor.

I'll PM him and tell him you just won him a cable if he wants it :aad

The outer shells in the photos are rather different.

Thanks,

Peter

 
Posts: 1931
Joined: Mon Jul 25, 2011 12:12 pm
Location: Burghfield, Reading, UK

Re: Does Anyone Recognise This Connector Cable?

Post by Brianc » Sun Feb 14, 2016 2:53 pm

I'm sure he'll be happy with that, Peter!


Return to In The Workshop



Who is online

Users browsing this forum: No registered users and 2 guests