CrustyTV wrote:Andrew already addressed this back on the 4th September http://forum.radios-tv.co.uk/viewtopic. ... 44#p123162
PYE625 wrote:It's a very worthwhile modification....stops the thermistor running like an electric fire !!
Colourstar wrote:I wondered about using some plumber's rubber repair tape I have in the toolbox. It's the width of 'standard' electrical masking tape, but designed for repairs to split pipes. It's non sticky, but very stretchy and, as such, self-binding, gripping itself tightly to form a seal as you wind it around.
Colourstar wrote:Good point Chris. I'd never heard of Kapton tape before. I'll follow the link and invest in some.
Colourstar wrote:That's great news about David's set. As far as my own ailing Murphy LOPT goes, I can muster 30v from a Farnell bench PSU but although this does make the overwind good and warm, it's some way off being hot enough to ease it apart. Andrew did his with 35v across it, so I'm just that little bit short of volts!
Users browsing this forum: No registered users and 5 guests